Signal Conditioners
With universal inputs
This range of products has user programmable universal inputs.
They can be easily configured to accept inputs from the most common process sensors / transducers. Input types include: mV, PRT, Thermocouple, mA and Volts. Temperature type inputs are linearised.
Configuration is achieved using simple to use PC software and connection to a USB port. During configuration, these units do not require connecting to a 24V power supply but are simply connected to a PC via a USB lead. The input range may also be set by direct sampling of the input from the sensor using front panel accessible pushbuttons.
Quick links
Programmable DIN rail mounting transmitters
D16-C Universal Input Transmitters (4-20mA output)
Accepts common process and temperature sensor inputs and provides a two wire 4-20mA current sink output. Very easy to configure using PC software. The input range may also be set by sampling the sensor input. All temperature ranges are linear to temperature. DIN rail mounting.
D16-V Universal Input Transmitter (Voltage output)
Accepts common process and temperature sensor inputs and provides a three-wire voltage output signal. Very easy to configure using PC software. The input range may also be set by sampling the sensor input. All temperature ranges are linear to temperature. DIN rail mounting.
Accessories...
For on-site testing and re-calibration
See the Current loop and voltage calibrator…
Other universal input signal conditioners in our range…
Data aquisition / Distributed I/O range
See Universal input data aquisition modules
with RS485 MODBUS RTU communications…
Digital panel meters
See
universal input and special purpose panel meters…
