Home » Products »

Resistance transmitters

Resistance transmitters convert resistance type signals into voltage or current signals.

The 114-1 two-wire (loop-powered) transmitter is a field-mounted unit and provides an output current sink proportional to the setting of a potentiometer.

The 107-1 series convert inputs from resistance transducers e.g. variable resistances, potentiometers, resistance temperature detectors (RTD), platinum resistance thermometers (PRT), into standard voltage or current process signals.

Resistance transmitter selection guide

PLEASE NOTE for the type 107-1 other outputs within the
following ranges can be provided.

Currents from 0-1mA to 0-30mA; Voltage from 0-1V to 0-10V;
Bidirectional voltage signals (e.g. ± 5 V); Reverse acting current and
voltage signals (e.g. 4-20mA to 20-4mA); Current sink output signals.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Key: Datasheet; User guide

TYPE	INPUT	OUTPUT	MAIN FEATURES	FIELD RE-RANGE	POWER	MOUNTING
107-1	Resistance Two or three wire resistance transducers Min change 50R max 10k PRT PT100 or PT130 Min span 40 deg C Max span 500 deg C	Current 0-10mA 0-20mA 4-20mA Current sink Voltage 0-5 V 1-5V etc	High impedance drive current output option ~ accepts either 2-wire /3-wire resistance or RTD inputs	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall or DIN rail
114-1	Potentiometer Values 500 ohm to 10kohm (standard value 5k)	Current 4-20mA Current sink	IP65 Protection ~ encapsulated electronics ~ Supply reversal protected	Yes - accessible Span and Zero	Loop-powered (loop supply voltage 12-50VDC)	Wall