|
|
|
|
Home | Products | Services | Contact |
Products » Plastic enclosure type ZA19
A plastic enclosure, DIN rail or surface mounting, for housing printed circuit boards with edge connector fingers. The ZA19 provides an adaptable base section which can be configured to accommodate up to 38 connections. Printed circuit board edge connector fingers plug into the connector in the base section. Two 19-pole pcb connector/terminal blocks may be installed; one is supplied as standard. The pcb connector-terminal block and two side plates, each with four cable entry knock-outs are removable. Connectors may also be positioned to place the terminals outside the enclosure - < see illustration >. A flame retardant version is available.
Material light-grey polystyrene with a recess to
accept a front label. Inside the cover are guides for two PCBs and fixing
points for the intermediate plate.
Material ABS light-grey. The plate is clipped inside
the cover and retains the PCB. The plate is suitable for printing or affixing
an adhesive label with connection diagram and/or user information.
Material ABS/UL94VO black with a 19 way pcb connector-terminal block and cable lead throughs. Side plates with threaded bosses for PG 9 leadthroughs are also available, see 'Order codes'.
