Home » Products »

Set-point generators

Process adjusters, ramp generator, raise lower...

Designed to provide fixed or adjustable set-point signals, this range of instruments includes fixed analogue output types, manually adjustable analogue or pulse / frequency output types and time-based manual/process signal controlled analogue output types.

Time-based manual or process signal controlled
The 112-65s Raise-Lower / Ramp Generator provides a time-based output, controlled by remote manual or process signals, which ramps up/down to programmable set-points. 

Set-point generator selection guide

PLEASE NOTE other outputs can be provided.
For 107 types:

Currents from 0-1mA to 0-30mA;
Voltage from 0-1V to 0-10V;
Bidirectional voltage signals (e.g. ± 5 V); Reverse acting current and
voltage signals (e.g. 4-20mA to 20-4mA); Current sink output signals.
For the 112-65s:
Currents from 0-1mA to 0-30mA; Voltage from 0-1V to 0-14V;
Current sink output signals.
For the 112-52 and 160-52:
Other pulse output voltages e.g. 5V, TTL, etc.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Key: Datasheet; User guide

TYPE	SET-POINT CONTROL	OUTPUT	MAIN FEATURES	FIELD RE-RANGE	POWER	MOUNTING
107-1A	Front panel mounted ten-turn dial	Current 0-10mA 0-20mA 4-20mA Current sink Voltage 0-5 V 1-5V etc.	Continuously variable output	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall or DIN rail
107-1F	Fixed set-point (no adjustment)		Fixed output	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall or DIN rail
107-1/RP	Via remote set-point potentiometer		Continuously variable output	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall or DIN rail
Raise- Lower / Set-point 112-65s	Voltage, current, open-collector or volt-free contacts	Current 0-10mA 0-20mA 4-20mA Current sink Voltage 0-5 V 1-5V 0-10 V etc.	Raise and Lower input signals control ramping up and down of output signal. e.g whilst Raise signal is present, output rises. Output min / max values (set-points), action taken with simultaneous raise /lower signals, etc. all programmable.	Yes via PC software	Universal 85-265 VAC ~ 12, 24, 48VDC	Wall or DIN rail
Pulse Generator 112-52	Front panel mounted ten-turn dial	Optically isolated open collector transistor ~ 24V pulse ~ Relay C/O contact etc.	Continuously variable output ~ Remote control option	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall or DIN rail
Pulse Generator 160-52	Front panel mounted switch	Optically isolated open collector transistor ~ 24V pulse ~ Relay C/O contact etc.	Switched output pulse rates ~ Remote output inhibit function	No	AC 110,200,220,240 ~ 12, 24, 48VDC	Wall ~ DIN rail ~ Rack mount ~ Panel mount